|
|
Post by rvdking on Apr 1, 2007 19:25:29 GMT -5
I have a 71 black widow with no motor but i got a motor that looks like a rupp motor but the carb is in the right port the tilt manifold i got goes in the left port does it matter? would it need a different cam if i put it in the left? ???
|
|
|
|
Post by Blackwidow on Apr 1, 2007 23:33:26 GMT -5
you have a 3.5hp or a later version hs40/h40 engine. Cam swap isnt a viable option due to valve sizing and material valves are made of
|
|
|
|
Post by rvdking on Apr 2, 2007 14:59:47 GMT -5
Then what port does the carb go in?
|
|
|
|
Post by Blackwidow on Apr 3, 2007 7:15:44 GMT -5
does 1 port have internal threads? If so that is the exhaust
|
|
|
|
Post by rvdking on Apr 3, 2007 14:58:54 GMT -5
Yes, but do they make a tilt manfold for the right port
|
|
|
|
Post by Blackwidow on Apr 5, 2007 22:52:48 GMT -5
the 71-72 Scramber had an angled intake on the right side
|
|
|
|
Post by T-Mack1 on Dec 23, 2007 22:09:04 GMT -5
Hold hand on the port, and hand spin the motor.
The intake port will have a vacuum, the exhaust will push air out.....
T.Mack
|
|
