|
Post by petec693 on Jan 23, 2009 8:57:15 GMT -5
i'm putting a h/f 6.5 on my 69 tt500. i'm concerned that the angle of the head towards the back of the bike will not allow room for the clutch mounted on the jackshaft.has anyone had experence with this. i do not have the clutch are jackshaft yet,but after setting the engine in place i got worried. thanks pete
|
|
|
Post by rvdking on Dec 13, 2010 18:52:17 GMT -5
I put a H/F 6.5 clone on my tt500 and it didn't clear so i got a set of rubber bushing to put the motor on that i got form mfg supply it gave it the 1/2'' of room it needed
|
|